REFERENCIA CAT. NUMBER	DIMENSIONES DIMENSIONS (MM.)
	BCSC 0005	40 x 60
	BCSC 0010	55 x 55
	BCSC 0020	60 x 80
	BCSC 0040	70 x 100
	BCSC 0050	80 x 120
	BCSC 0060	100 x 150
	BCSC 0070	100 x 180
	BCSC 0077	140 x 140
	BCSC 0080	120 x 180
	BCSC 0110	160 x 220
	BCSC 0120	180 x 250
	BCSC 0130	200 x 300
	BCSC 0135	230 x 320
	BCSC 0140	250 x 350
	BCSC 0150	300 x 400

White strip safety bags With white strips for writing for better sample identification. For solid samples. Made of transparent polyethylene, very resistant. Suitable for laboratories (for tubes, swabs, etc.). PE.

	REFERENCIA CAT. NUMBER	DIMENSIONES DIMENSIONS (MM.)
	BCSF 0001	40 x 60
	BCSF 0011	55 x 55
	BCSF 0021	60 x 80
	BCSF 0031	70 x 100
	BCSF 0041	80 x 120
	BCSF 0051	100 x 150
	BCSF 0061	120 x 180
	BCSF 0071	150 x 200
	BCSF 0081	160 x 220
	BCSF 0091	180 x 250
	BCSF 0101	200 x 300
	BCSF 0111	250 x 350

Sealer Easy handling with timer to close polypropylene or polyethy lene bags. 300 mm sealing lengh, with indicator light.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	MASE 0100	220 V – 380 W

Alcohol lamps Complete with wick and threaded cap. Soda glass.

	REFERENCIA CAT. NUMBER	DESCRIPCIÓN DESCRIPTION
	95 51 25	Completa / Complete
	95 51 30	Mecha, 1 metro / Wick, 1 meter

Lamp of alcohol Complete with wick and threaded cap. Made of stainless steel.

	REFERENCIA CAT. NUMBER	DESCRIPCIÓN DESCRIPTION
	LAMP 0150	Completa, capacidad 150 ml / Complete, capacity 150 ml.
	95 51 30	Mecha, 1 metro / Wick, 1 meter

Laboratory burner For laboratory, education centres, drugstores, optician’s, gold work, etc uses. Regulator flame. Cartrigde according to EN 417 standard, holeable cartridge for butane / propane with 4 hours of autonomy. Avoid the direct sun light and the temperatures above 50 ºC.

	REFERENCIA CAT. NUMBER	DESCRIPCIÓN DESCRIPTION
	MEGB 0101	Mechero de laboratorio / Laboratory burner
	MEGB 0110	Cartucho / Cartridge

Wire gauze With fibre in the middle and without asbestos.

	REFERENCIA CAT. NUMBER	MEDIDAS LADO SIDE DIMENSIONS (MM.)	Ø CERÁMICA CERAMIC Ø (MM.)
	TELA 0125	125 x 125	80
	TELA 0150	150 x 150	100
	TELA 0200	200 x 200	145

Hand Held Electronic Colony Counter

All-in-one counter combines a multi-function electronic counter with a pen for marking Petri dishes to prevent missing or double-counting colonies. Light, ergonomic body is balanced for easy manipulation. Touch controls for multiple counts, sums, counting up or down, and more!
Counter automatically beeps with each count – or select the LED flash mode for a visual alert ofeach count. Press the lock key to write with pen without counting.
The pen provides highly visible marks on both plastic and glass dishes. Includes one fine-point pen and stand.

	REFERENCIA CAT. NUMBER	DESCRIPCIÓN DESCRIPTION
	COTC 1000	Contador de colonias / Colony Counter

Refractory crucible With spout. Trunk-conical.

	REFERENCIA CAT. NUMBER	Ø EXT. EXT. Ø (MM.)	ALTURA HIGH (MM.)
	CRIT 0016	75	110

Crystallizing dishes, reinforced rims Soda glass

	REFERENCIA CAT. NUMBER	DIÁMETRO DIAMETER (MM.)
	92 60 10	100
	92 60 12	120
	92 60 15	150
	92 60 19	190

Crystallizing dishes with spout

	REFERENCIA CAT. NUMBER	CAPACIDAD APROX. CAPACITY APPROX. (ML.)	DIÁMETRO DIAMETER (MM.)
	92 50 14	900	140
	92 50 19	2.000	190

Coplin pattern, staining tank For slides 76 x 26 mm. back to back, soda glass.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	93 50 00	Capacidad para 5 portas / Capacity: 5 slides

Hellendahl pattern, staining tank For slides 76 x 26 mm. back to back. Soda glass.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	93 60 00	Capacidad para 8 portas / Capacity: 8 slides

Schiefferdecher pattern, staining tank For slides 76 x 26 mm. back to back, soda glass.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	93 70 00	Capacidad para 10 portas / Capacity: 10 slides

Staining tank For slides 76 x 26 mm back to back. Soda glass.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	93 40 10	Capacidad para 10 portas, completa
		Capacity: 10 slides, complete
	REFERENCIA CAT. NUMBER	COMPUESTA DE CONSISTS OF
	93 40 02	Cubeta de 85 x 105 con tapa
		Tank 85 x 105 with lid
	93 40 04	Cestillo / Basket
	93 40 06	Gancho / Hook

Desiccators Glass Borosilicate glass, buttom screw cover, without disk.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES	Ø INT. INT Ø (MM.)
	92 92 10	Vidrio borosilicato c/tapa / Borosilicate glass w/cover	150
	92 92 20	Vidrio borosilicato c/tapa / Borosilicate glass w/cover	200
	92 92 50	Vidrio borosilicato c/tapa / Borosilicate glass w/cover	250
	92 92 60	Vidrio borosilicato c/tapa / Borosilicate glass w/cover	300
	REFERENCIA CAT. NUMBER	ACCESORIOS ACCESORIES	Ø INT. INT Ø (MM.)
	93 08 10	Placa metálica para desecador / Metallic dessicator disc	150
	93 08 20	Placa metálica para desecador / Metallic dessicator disc	200
	93 08 25	Placa metálica para desecador / Metallic dessicator disc	250
	93 08 30	Placa metálica para desecador / Metallic dessicator disc	300
	93 08 11	Placa de porcelana para desecador / Porcelain dessicator disc	150
	93 08 21	Placa de porcelana para desecador / Porcelain dessicator disc	200
	93 08 26	Placa de porcelana para desecador / Porcelain dessicator disc	250
	93 08 31	Placa de porcelana para desecador / Porcelain dessicator disc	300

Glass desiccators “Novus” for vacuum Borosilicate glass, buttom screw cover, without disk.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES	Ø INT. INT Ø (MM.)
	92 92 11	Vidrio borosilicato, c/tapa y llave	150
		Borosilicate glass, w/cover and stopcock
	92 92 21	Vidrio borosilicato, c/tapa y llave	200
		Borosilicate glass, w/cover and stopcock
	92 92 51	Vidrio borosilicato, c/tapa y llave	250
		Borosilicate glass, w/cover and stopcock
	92 92 61	Vidrio borosilicato, c/tapa y llave	300
		Borosilicate glass, w/cover and stopcock
	REFERENCIA CAT. NUMBER	ACCESORIOS ACCESORIES	Ø INT. INT Ø (MM.)
	93 08 10	Placa metálica para desecador / Metallic dessicator disc	150
	93 08 20	Placa metálica para desecador / Metallic dessicator disc	200
	93 08 25	Placa metálica para desecador / Metallic dessicator disc	250
	93 08 30	Placa metálica para desecador / Metallic dessicator disc	300
	93 08 11	Placa de porcelana para desecador / Porcelain dessicator disc	150
	93 08 21	Placa de porcelana para desecador / Porcelain dessicator disc	200
	93 08 26	Placa de porcelana para desecador / Porcelain dessicator disc	250
	93 08 31	Placa de porcelana para desecador / Porcelain dessicator disc	300
	93 06 60	Tapón a rosca con orificio / Knob with hole
	93 06 70	Junta silicona para desecadores / Rubber washer
	93 04 00	Llave para desecador para vacío / Rubber washer

Plastic dessicators The external sleeve for vacuum, transparent PC cover, base and dessicant container of PP.

	REFERENCIA CAT. NUMBER	DIÁMETRO DIAMETER (MM.)
	DPCO 0149	150
	DPCO 0197	200
	DPCO 0240	250

Dishes for dessicators. With hole. PP

	REFERENCIA CAT. NUMBER	DIÁMETRO DIAMETER (MM.)
	DPLA 0140	140
	DPLA 0190	190
	DPLA 0230	230

Desiccator cabinet Includes two shelves, frontal thermometer and hygrometer, 2 latches for tamper the cabinet. Can be stacked three highs, saving space. Used with any desiccant.

	REFERENCIA CAT. NUMBER	MEDIDAS Ø DIMENSIONS (CM.)
	CADE 1000	31,4 x 34,1 x 41,4
	CADE 2000	41,7 x 34,1 x 41,4

Drying apparatus with stopper stopcock

	REFERENCIA CAT. NUMBER	DESCRIPCIÓN DESCRIPTION	ESMERILADO M JOINT M	ESMERILADO H JOINT H
	25 46 00	Completo / Complete	29 / 32	14 / 23
	25 46 41	Torre / Drying chamber		—
	25 46 01	Tubo con llave N / Tube with stopcock	—	14 / 23
	25 46 40	Tapón-llave M / Stopper	29 / 32	—

Sterilizing drum With lid, handle and security closure, made of stainless steel.

	REFERENCIA CAT. NUMBER	DIÁMETRO DIAMETER (MM.)	ALTURA HEIGHT (MM.)
	TAMB 0120	100	120
	TAMB 0140	200	140
	TAMB 0180	300	180
	TAMB 0350	300	350

Sterilization boxes With crammed lid, made of stainless steel.

	REFERENCIA CAT. NUMBER	ALTO HEIGHT (MM.)	LARGO LENGTH (MM.)	ANCHO WIDTH (MM.)
	CUBE 0160	40	160	100
	CUBE 0180	40	180	80
	CUBE 0200	50	200	100
	CUBE 0250	50	250	150

Pipette container Made of stainless steel.

	REFERENCIA CAT. NUMBER	DIÁMETRO DIAMETER (MM.)	ALTURA HEIGHT (MM.)
	COES 0210	70	210
	COES 0260	70	260
	COES 0350	70	350
	COES 0400	70	400

Cleaning agents for laboratory ware, LM1 Liquid neutral detergent, biodegradable, free from phosphate chlorine and alkalis, non aggressive on paints and suitable for the removal of any kind of waste. Instructions: 2% water solution. Working temperature: 20 – 90 ºC.

	REFERENCIA CAT. NUMBER	ENVASE QUANTITY (ML.)
	DETE 0010	5.000

Cleaning agents for laboratory ware, LM2 Alkaline liquid detergent, biodegradable, phosphate free with high descaling actino; avoids any side effect on sensitive and delicate tests. Excellent radioactive decontamination agent. (Cannot be used with Polycarbonate). Instructions: 2-4% water solution. Working temperature: 20 – 90 ºC.

	REFERENCIA CAT. NUMBER	ENVASE QUANTITY (ML.)
	DETE 0020	5.000

LA2 liquid detergent
Liquid detergent neutral at any concentration, free from phosphate, chlorine and alkalis. Suitable for automatic and manual washing of laboratory ware. Washing action without any side effect on sensitive biological, pharmaceutical or chemical analysis.
Instructions and working temperature:
a) automatic washing: 4 – 8 ml/lt, 60 – 90 ºC.
b) manual washing: 10 – 20 ml/lt, 20 – 60 ºC.

	REFERENCIA CAT. NUMBER	ENVASE QUANTITY (ML.)
	DETE 0030	5.000

LITOPOL detergent Liquid detergent acid especially designed for cleaning, hard residue on the walls in water stills, with quartz heater.

	REFERENCIA CAT. NUMBER	ENVASE QUANTITY (ML.)
	LITO 1000	1.000

Flow indicator, ball For liquid flow from 50 ml/min (in horizontal position) and 140 ml/min (in vertical position). Minimum air flow 3 litres/min horizontal and 8 litres/min vertical. Speed of rotation of ball proportional to flow. Not to be used with corrosive fluids or over +50 ºC.

	REFERENCIA CAT. NUMBER	MEDIDAS DIMENSIONS (MM.)
	DFPS 0100	102 x 14 x 57

Brushes For cleaning labware.

	REFERENCIA CAT. NUMBER	DIMENSIONES DIMENSIONS	DESCRIPCIÓN DESCRIPTION
	ESCO 0001	620 x 130 x 100	Lavado frascos 10 L. / Cleaning 10 L. Bottles
	ESCO 0002	530 x 120 x 95	Lavado frascos 5 L. / Cleaning 5 L. Bottles
	ESCO 0003	500 x 100 x 70	Lavado matraces 2 L. / Cleaning 2 L. Flasks
	ESCO 0004	370 x 100 x 70	Lavado matraces 1 L. / Cleaning 1 L. Flasks
	ESCO 0005	300 x 90 x 60	Lavado botellas 1/2 L. / Cleaning 1/2 l. bottles
	ESCO 0006	360 x 100 x 45	Lavado probetas 36 cm. / Cleaning cylinders 36 cm
	ESCO 0007	670 x 85 x 23	Lavado buretas 70 cm. / Cleaning burettes 70 cm
	ESCO 0008	240 x 65 x 50	Lavado frasquitos p / Cleaning little bottles
	ESCO 0009	270 x 95 x 35	Lavado probetas cte. / Cleaning cylinders cte.
	ESCO 0010	230 x 85 x 25	Lavado tubo ensayo / Cleaning test tube
	ESCO 0011	220 x 75 x 20	Lavado tubos medianos / Cleaning medium tubes
	ESCO 0012	220 x 75 x 15	Lavado tubos hemólisis g / C. Big hemolysis tubes
	ESCO 0013	210 x 60 x 10	Lavado tubos hemólisis p / C. Small hemolysis tubes
	ESCO 0014	500 x 85 x 7	Lavado pipetas 45 cm. / Cleaning pipettes 45 cm.

Hand Held Magnifier It can be dismantled, glass lens, plastic handle.

	REFERENCIA CAT. NUMBER	DIÁMETRO DIAMETER	AUMENTOS MAGNIFICATION
	LUMP 0050	50	10x
	LUMP 0060	60	6x
	LUMP 0075	75	5x

Hand Held Magnifier Bifocal lens, Built-in light, handle and rim of black plastic, supplied with two 1.5 V batteries.

	REFERENCIA CAT. NUMBER	DIÁMETRO DIAMETER	AUMENTOS MAGNIFICATION
	LUMR 0010	80 Ø	5x

Glass pencils Different colours,for writing on polished surfaces of glass, plastic and metal.

	REFERENCIA CAT. NUMBER	COLORES COLOURS
	LACR 0010	Rojo / Red
	LACR 0020	Azul / Blue
	LACR 0050	Negro / Black

Glass pens Permanent and bright colours, quick drying, odourless, ink with alcohol base, cool resistant. For surface of glass, porcelain, plastic, metal, tapes, negatives, aluminium plate, freeze bags, paper, etc.

	REFERENCIA CAT. NUMBER	COLORES COLOURS	GROSOR PUNTA POINT THICKNESS (MM.)
	ROCR 0004	Rojo / Red	0,4
	ROCR 0006	Azul / Blue	0,4
	ROCR 0008	Negro / Black	0,4
	ROCR 0010	Rojo / Red	1
	ROCR 0012	Azul / Blue	1
	ROCR 0014	Negro / Black	1

Pencil with diamond tip To engrave on glass.

	REFERENCIA CAT. NUMBER	DESCRIPCIÓN DESCRIPTION
	LAPD 0010	Con mango de madera / With wooden handle

Culture dishes, Petri Soda glass.

	REFERENCIA CAT. NUMBER	DIÁMETRO DIAMETER (MM.)
	95 61 06	60
	95 61 08	80
	95 61 10	100
	95 61 12	120
	95 61 15	150

Microscope slides 76 x 26 mm.

– Extra transparent glass.
– Thickness 0.80 / 1.00 mm.
– Protector paper sheet between each slide.

	REFERENCIA CAT. NUMBER	DIÁMETRO DIAMETER (MM.)
	95 55 01	Cantos sin esmerilar / Cut egdes
	95 55 11	Cantos esmerilados / Ground egdes
	95 55 21	Cantos esmerilados, c/ franja mate de 20 mm
		Ground egdes, with frosted band 20 mm

Cover glass Box of 100 units.

	REFERENCIA CAT. NUMBER	MEDIDAS DIMENSIONS (MM.)
	COBJ 1818	18 x 18
	COBJ 2020	20 x 20
	COBJ 2222	22 x 22
	COBJ 2424	24 x 24

Microscope slide dispenser Slides are ejected one at a time by turning either side. ABS y PS.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY
	EXPD 0050	50 porta-objetos / 50 slides

Slide box Store up to 100 76×26 mm slides. Numered sheet for identify slides. PP

	REFERENCIA CAT. NUMBER	CAPACIDAD (PORTA-OBJETOS) CAPACITY (SLIDES)	COLOR COLOUR
	ESPO 0100	100	Blanco / White
	ESPO 0101	100	Rojo / Red
	ESPO 0103	100	Azul / Blue

Homogenisers With conical glass plunger for small quantities of product. Glass plunger shaft 8 mm.

	REFERENCIA CAT. NUMBER	CAPACIDAD MÁXIMA MAXIMUN CAPACITY (ML.)
	24 56 11	2

Homogenisers

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY	Ø CÁMARA X L CHAMBER X L (MM.)
	24 55 11	1	11 x 48
	24 55 13	7	13 x 82
	24 55 15	15	15 x 94
	24 55 25	40	25 x 140

Homogenisers With glass plunger. For manual work.

	REFERENCIA CAT. NUMBER	CAPACIDAD MÁXIMA MAXIMUN CAPACITY (ML.)
	24 50 21	8
	24 50 22	25

Homogenisers, tissue grinders, plain
Borosilicate glass are used for the controlled reduction of particle size and homogenisation for a variety of substances, specially biological material. Size reduction/homogenisation is brought about by the shearing forces generated by the movement of a rotating plunger in precision bore tube. Plunger head is pure PTFE, plunger shaft stainless steel, 6,5 mm int., tube precision borosilicate glass, and the clearance between the plunger head and tube 0.15-0.25 mm. It is supplied complete with glass body and plunger plain.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY	Ø (MM.) Ø (MM.)	ALTURA HEIGHT
	24 54 41	2	8	120
	24 54 42	5	12	135
	24 54 43	10	15	150
	24 54 44	15	19	155
	24 54 45	30	25	175
	24 54 46	50	32	195

Homogenisers, tissue grinders, serrated tip
Borosilicate glass are used for the controlled reduction of particle size and homogenisation for a variety of substances, specially biological material. Size reduction/homogenisation is brought about by the shearing forces generated by the movement of a rotating plunger in precision bore tube. Plunger head is pure PTFE, plunger shaft stainless steel, 6,5 mm int., tube precision borosilicate glass, and the clearance between the plunger head and tube 0.15-0.25 mm. It´s suplly completes with glass body and plunger grated.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY	Ø (MM.) Ø (MM.)	ALTURA HEIGHT
	24 57 41	2	8	120
	24 57 42	5	12	135
	24 57 43	10	15	150
	24 57 44	15	19	155
	24 57 45	30	25	175
	24 57 46	50	32	195

Glass mortars With pestle, Soda glass.

	REFERENCIA CAT. NUMBER	Ø INTERIOR ID (MM.)
	95 50 02	80
	95 50 04	100
	95 50 06	120
	95 50 08	150
	95 50 10	200

Agate Mortars and Pestles
Made of precious stones (SiO2), which are very appropriate for substance disintegration and mixing. Great resistance against physical and chemical agents (except fluorhydric acid) due to high chemical purity of the agate, It avoids the sample contamination during the process, Another advantage is its great resistance to the friction. Polished internal surface and pestle.
Agate features:
- density: 2.6 g / cm2
- hardness: 7 (Mohs scale)
- fusion point: 1800 – 2000 ºC.
- compression resistance: 110 Kg / mm2.
- cracking resistance: 210 Kg / mm2.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY	DIMENSIONES DIMENSIONS
	MOAG 0045	15	53 x 62 x 13
	MOAG 0065	30	65 x 81 x 16
	MOAG 0080	70	77 x 100 x 19
	MOAG 0105	140	103 x 126 x 28
	REFERENCIA CAT. NUMBER	LONGITUD MANO PESTLE LENGTH (MM.)
	MOAG 0002	59
	MOAG 0004	63
	MOAG 0006	81
	MOAG 0008	101

Folding fridge
Great capacity (for 9 units of 1.5 l. bottles) 42 litters, easy to transport with casters, 3 positions handle and two lateral handles. It preserves up to 15 hours with storage battery, free insulation of CFC and HCFC. Material 70 nylon/ PVC back, lateral pocket, extractable base.

	REFERENCIA CAT. NUMBER	MEDIDAS EXT. EXT. DIMENSIIONS (CM.)	COLOR COLOUR
	NEPL 0042	42.6 x 33.4 x 40.1	Azul / Blue

Thermoelectric Icebox P.28 Deluxe
Selector of cold and heat. Control of battery incorporated. With thermoelectric system to preserve the cold or warm samples, with control of battery to protect the battery of the car. Useful capacity of storage 28 liters. Conservation of the temperature environment (± 1ºC) from 32ºC cools up to 18ºC, depending on heat it warms up to 65ºC. With compartment for gathering the cables in the lid, length of the cable 2.75 m. It works directly connected to the burner of the car 12Vdc, to connect to 230Vac the transformer should be used 230Vac/ 12Vdc and for connecting to 24Vdc the transformer of current should be used 24Vdc/ 12Vdc. These transformers are sold separately. Using only the Campingaz transformers with the thermoelectric iceboxes.

	REFERENCIA CAT. NUMBER	CORRIENTE MAIN POWER	MEDIDAS DIMENSIIONS (CM.)	PESO WEIGHT (KG.)
	NETE 0028	12Vd/ 230V/ 24V	48.8 x 27.2 x 38.7	3.94
	REFERENCIA CAT. NUMBER	ACCESORIOS ACCESORIES
	NETE 0002	Transformador 230Vac/ 12Vdc / Transformer 230Vac/ 12Vdc
	NETE 0004	Euroconvertidor 24Vdc/ 12Vdc / Euroconvertor 24Vdc/ 12Vdc

Extreme Isotherm fridge
Specially resistant, compact, effective, designed for the daily use and transport of samples without risk for the products, supporting even 250 kg. Outlet valve (except models of 10, 17 and 24 l), blockable lid by the handle, with integrated closing. Material: polypropylene. Insulation: body and lid of PU foam, free of HCFC and CFC. It preserves the samples, liquids, cold or hot food with storage battery up to 36 hours (45 l) 24 hours (17 l, 24 l, 29 l, 32 l) y 17 hours (10 l).

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (L.)	MEDIDAS INT. INT. DIMENSIIONS (CM.)	MEDIDAS EXT. EXT. DIMENSIIONS (CM.)
	NEEX 0024	24	32 x 35.5 x 21.5	37 x 45 x 29.5
	NEEX 0032	32	35.5 x 38 x 24.2	41 x 48 x 31.5
	NEEX 0045	45	34 x 51.5 x 26.2	40 x 58 x 33

Absorbent paper Very absorbent paper. Flexible layer of polyethylene. Ideal for protecting work surfaces from leakages

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	PAPB 0510	100 hojas 420 x 520 mm / 100 sheets 420 x 520 mm
	PAPB 0500	500 hojas 420 x 520 mm / 500 sheets 420 x 520 mm
	PAPB 0501	Bobina de 100 m largo x 50 cm de ancho
		Reel 100 m length x 50 cm width

Silver foil
Silver foil roll, ideal for samples and food products.

	REFERENCIA CAT. NUMBER	LONGITUD LENGTH (MM.)	ANCHO WIDTH (CM.)	PESO WEIGHT (GR.)
	PAAL 0300	300	40	2.580
	PAAL 0310	300	30	1.935

Parafilm M® Sealing Film
Two-way stretch sealing film for: flasks, beakers, culture tubes, …
Temperature range: -45 ºC up to +50 ºC
Clings around irregular shapes and surfaces, stretches up to 200%

	REFERENCIA CAT. NUMBER	LONGITUD LENGTH (MM.)	ANCHO WIDTH (CM.)
	PAPF 0010	38	100

Adhesive film paper

	REFERENCIA CAT. NUMBER	LONGITUD LENGTH (MM.)	ANCHO WIDTH (CM.)
	PAFL 0030	300	30
	PAFL 0040	400	40

Write-On Label tape
Write-On Label Tape adheres to any clean surface, including Teflon® fluoropolymer resin coated materials, and peels off without leaving a sticky residue. Pencil, ball-point pen or solvent ink marker remains legible under the most demanding laboratory conditions. The tape consists of coloured Kraft paper with rubber resin adhesive that resists moisture and most solvents. The tape will withstand a maximum temperature of 257 ºC for 30 minutes or 80 ºC for 24 hours and can be used down to -73 ºC.

	REFERENCIA CAT. NUMBER	MEDIDAS DIMENSIONS (MM.)	COLOR COLOUR
	CIAB 0190	19	Blanco / White
	CIAR 0190	19	Rojo / Red
	CIAA 0190	19	Amarillo / Yellow
	CIAZ 0190	19	Azul / Blue
	CIAN 0190	19	Naranja / Orange
	CIAV 0190	19	Verde / Green
	SOEX 0100	Soporte expendedor para 5 cintas / Multiple roll tape dispenser

Autoclave tape
Self adhesive paper with indicating stripes. Roll 50 metres x 19 mm.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	CINT 0010	Método Poupinel (calor seco) / Poupinel method (dry heat)
	CINT 0020	Autoclave (20 – 120 ºC)

Multiple roll tape dispenser
Table stand with holes to fix it with screws (not included) on a table or wall. Three plastic separating disks are included, which make sure the soft dispensation of the tape and three moulded support for pencils. Support for writing on and edge with saw for cutting the tape. 1.27 mm. white roll tape for writing and two black glass pens code ROCR0008, with 0.4 mm. thickness, are included.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY	DIMENSIONES DIMENSIONS (MM.)
	SOEX 0100	5 cintas de 19 mm.	302 x 143 x 106

Atomizers Three grades of spraying. Capacity: 100 ml.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	34 57 41	Pulverizado fino / Fine spray
	34 57 42	Pulverizado medio / Medium spray
	34 57 43	Pulverizado grueso / Thick spray

Atomizers Three grades of spraying and joint 19/26.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY	PULVERIZADO SPRAY
	34 58 41	100	Fino / Fine
	34 58 42	100	Medio / Medium
	34 58 43	100	Grueso / Thick
	34 58 51	250	Fino / Fine
	34 58 52	250	Medio / Medium
	34 58 53	250	Grueso / Thick

Richardson rubber bulb

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	34 60 00	Aplicable a pulverizadores 34 57 y 34 58 (con malla)
		For atomizers 3457 and 3458 (with mesh)
	34 60 01	Aplicable a pulverizadores 34 57 y 34 58 (sin malla)
		For atomizers 3457 and 3458 (without mesh)

Gloves Fully aluminized back. According to EN 420. CE

	REFERENCIA CAT. NUMBER	TALLA SIZE
	GUAA 0020	10

Waterproof gloves Resistant to chemicals, foam inside. Foam finished. Length approx. 275 mm.According to EN 388, EN 511 and EN 374.

	REFERENCIA CAT. NUMBER	TALLA SIZE
	GUAY 0009	9

Gloves Kevlar Against cuts abrasion. Without seams. According to EN 388. CE

	REFERENCIA CAT. NUMBER	TALLA SIZE
	GUKV 0000	9
	GUKV 0001	10

Gloves Kevlar Large cuff, lined with cotton, resistant against abrasion according to EN 388 standard and heat resistant according to EN 407.

	REFERENCIA CAT. NUMBER	TALLA SIZE
	GUKV 0011	10

Latex gloves Disposable. Powdered. 100% natural latex. Packs 100 gloves. CE.

	REFERENCIA CAT. NUMBER	TALLA SIZE
	GUAL 1005	S
	GUAL 1007	ML
	GUAL 1008	XL

Natural latex gloves Disposable. Powdered. 100% natural latex. Packs 100 gloves. CE.

	REFERENCIA CAT. NUMBER	TALLA SIZE	LONGITUD LENGTH (MM.)
	GUAL 0005	5,5 – 7	24
	GUAL 0007	7 – 8,5	24
	GUAL 0008	8,5 – 10	24

Neopren gloves Floc lined, gripping surface. Thickness 0.75 mm. According to EN 388, EN 374-2 and EN 374 standards.

	REFERENCIA CAT. NUMBER	TALLA SIZE	LONGITUD LENGTH (MM.)
	GUAE 0006	6,5 – 7	30
	GUAE 0007	7,5 – 8	30
	GUAE 0008	8,5 – 9	30
	GUAE 0009	9,5 – 10	30
	GUAE 0010	10,5 – 11	30

Neopren gloves Floc lined, gripping surface. Thickness 0.75 mm. According to EN 388, EN 374-2 and EN 374 standards.

	REFERENCIA CAT. NUMBER	TALLA SIZE
	GUAN 1207	S
	GUAN 1208	ML
	GUAN 1209	XL

Neopren gloves Disposable. Thickness 0.10 mm. Lightly powdered. Length 24 cm. According to EN 374, EN 374-2, EN 388. Packs of 100 gloves, ambidextrous.

	REFERENCIA CAT. NUMBER	TALLA SIZE	LONGITUD LENGTH (MM.)
	GUAN 0207	6,5 – 7	100
	GUAN 0208	7,5 – 8	100
	GUAN 0209	8,5 – 9	100

Nitrile gloves High chemical and puncture resistance. Rough without flock lined. Green. Length 330 mm, thickness 0.38 according toEN 388, EN 374.

	REFERENCIA CAT. NUMBER	TALLA SIZE
	GUAN 0007	7
	GUAN 0008	8
	GUAN 0009	9
	GUAN 0010	10
	GUAN 0011	11

Protective gloves For use with autoclaves, ovens, heat resistant up to 232 ºC, washable, without asbestos. CE.

	REFERENCIA CAT. NUMBER	MEDIDAS DIMENSION (MM.)
	GUAP 0280	Largo guante 280, largo total 470
		Wrist length 280, mid-arm length 470

Glove, silicone rubber Ideal for taking cold or hot objects, resistant from -55 up to 260 ºC. It has some very adherent semicircular suckers, more than conventional.

	REFERENCIA CAT. NUMBER	DIMENSIONES DIMENSION (MM.)
	GPVB 0100	190 x 100

Vynil gloves Disposable. Powdered. Natural colour. Packs 100 gloves. CE

	REFERENCIA CAT. NUMBER	TALLA SIZE
	GUAV 1006	S
	GUAV 1007	ML
	GUAV 1008	XL

Vynil gloves Disposable. Powdered. High quality. Natural colour. CE

	REFERENCIA CAT. NUMBER	TALLA SIZE	LONGITUD LENGTH (MM.)
	GUAV 0006	6 – 6,5	23
	GUAV 0007	7 – 7,5	23
	GUAV 0008	8 – 8,5	23
	GUAV 0009	9 – 9,5	23

Station eye Wash Bottles With contoured eye-cup and fitted with a dust cap.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	DESCRIPCIÓN DESCRIPTION
	ELON 1000	1.000	Equipo completo / Complete
	Frascos lavaojos / Eye wash bottles
	Con disco perforado que permite el lavado o enjuague suave y constante.
	With perforated disc that allow the washing or smooth and constant rinse. LDPE
	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)
	FLON 0500	500
	FLON 1000	1.000

Eyeshield Polycarbonate screen, mechanical protection according to EN 166 standard, UV protection according to EN 170 standard. Marked 3-1.2 D1F. It absorbs >99.9% of the UV radiation up to 385 nm. Adjustable arms in length.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	GAPR 0500

Eyeshield Polycarbonate lens, 1 mm thickness. Clear, non-misting and scratch resistant. According to EN 166 standard. CE

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	GAPR 0100	Monobloque / Single lens
	GAPR 0200	Monobloque, anti UV / Single lens, UV

Goggle Clear lens, designed to be worn over prescription spectacles, adjustable headband, ventilated side shields. CE, DIN 234

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	GAPA 0010	Lente protector monopieza / Single lens

Goggle Clear polycarbonate lens, 1 mm thickness. According to EN 166 standard.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	GAPR 0400	Lente protector monopieza / Single lens

Hearing protector Adapter for medium frecuency, according to EN 352 standard. Mitigation: 29 dB. CE. ISO 4869.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	PRAR 0100	Con suspensión craneal / With head cushion
	PRAR 0200	Sin suspensión craneal / Without head cushion

Safety shield
The safety shields are available in two sizes with different thickness and are made of high quality, clear acrylic; are free standing, portable and stable, and are all fitted with non-skid feet. The model PANT 0100 is designed to provide laboratory and healthcare personnel with facial protection from hazardous substances, aerosol and splashing, The model PANT 0200 is designed to provide additional protection from radiations while using beta emitting isotopes, including P32. PMMA.

	REFERENCIA CAT. NUMBER	DIMENSIONES DIMENSION (MM.)	ESPESOR THICKNESS (MM.)
	PANT 0100	242 x 365	5
	PANT 0200	305 x 480	9

Face shield Comprises browguard, visor and harness. Very resistant to chemicals. Interchangeable and clear polycarbonate visor. According to EN 166 standard.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	PRFA 0100	Protector completo / Complete

Diffuser for vacuum systems.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	31 61 00	Difusora (sólo vidrio) / Diffuser (only glass)
	31 61 01	Carga de mercurio (1.200 g) / Mercury (1,200 g)

Vacuum trap

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	33 85 00	Se consigue el vacío máximo, en un recipiente de 1 litro, con una presión de agua de 3 Kg/cm2, en aproximadamente 3 minutos. El vacío obtenido nunca puede rebasar el valor de la tensión de vapor de agua a la temperatura de trabajo.
		It can get maximum vacuum, in 1 L container, with a water pressure of 3 Kg/cm2, in approx. 3 minutes. The vacuum will never be more than water vapour pressure at that temperature
		Temperatura agua (ºC):10 – 20 – 30
		Water temperature (°C):
		Vacío máximo (Torr):9,2 – 17,4 – 31,6
		Pressure (mm Hg):

Vacuum trap With float valve.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	33 91 00	Con válvula de cierre. Se consigue el vacío máximo, en un recipiente de 1 litro, con una presión de agua de 3 Kg/cm2, en aproximadamente 3 minutos. El vacío obtenido nunca puede rebasar el valor de la tensión de vapor de agua a la temperatura de trabajo.
		With float valve. It can get maximum vacuum, in 1 L container, with a water pressure of 3 Kg/cm2, in approx. 3 minutes. The vacuum will never be more than water vapour pressure at that temperature.
		Temperatura agua (ºC):10 – 20 – 30
		Water temperature (°C):
		Vacío máximo (Torr):9,2 – 17,4 – 31,6
		Pressure (mm Hg):

Water jet Pump This pump will work on pressures up to 10 kg / cm2. Built in non return valve to eliminate back flow. Useful for sucking to waste any split chemicals as well as for filter work. Easily dismantled for cleaning. Polypropylene. Autoclavable.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	TROM 0010	Trompa de vacío / Water jet vacuum pump
	TROM 0001	Recambio del tubo conector de la trompa
		Tube connectors

Vacuum manifold Double way and four glass hollow keys stopcocks.

	REFERENCIA CAT. NUMBER	ESMERILADO JOINT
	29 03 80	14 / 23
	*Bajo demanda se pueden fabricar con llaves de teflón.
	On request, we can manufacture with PTFE stopcocks.

Vacuum Pump R-300 (Find more pumps in 75-77 pages).

Piston-powered vacuum pump, oil-free, featuring innovative electronic and mechanical technology. The R-300 is adaptable to many laboratory requirements.
• Quiet and low vibration
Directly motor driven without transmission mechanism and quality rubber feet keep the noise level only at approx 540 dB.
• Compact and light weight
Aluminium die-cast and precise construction make the R-300 so small and compact, weight only 4.1 kg.
• Clean and maintenance free
Oil-free design makes the R-300 clean and maintenance free, we guarantee two years of 3000 working hours of free service parts (excluding moisture filter).

	REFERENCIA	ESPECIFICACIONES TÉCNICAS TECHNICAL SPECIFICATIONS
	CAT. NUMBER
	BOVT 0300	Vacío max. / Max. vacuum:	6500 mm. Hg
		Velocidad vacío (2.5 L tanque) / Vacuum speed (2.5 L tank):
		0 mm.Hg:	17 l/min = 0.6 CFM
		100 mm.Hg:	14 l/min = 0.49 CFM
		200 mm.Hg:	12 l/min = 0.42 CFM
		300 mm.Hg:	9.5 l/min = 0.34 CFM
		400 mm.Hg :	7 l/min = 0.25 CFM
		500 mm.Hg :	4,5 l/min = 0.16 CFM
		600 mm.Hg :	1,5 l/min = 0.05 CFM
		Voltaje / Power :	220 V / 50 Hz
		Caudal max. / Max. flow rate :	13 l/ min
		Rotación motor / Motor rotation:	1450 rpm
		Potencia / Horse power:	1/8 CV / HP
		Nº polos / Pole:	4 P
		Peso bruto / Gross weight:	5.1 kg
		Peso neto / Net weight :	4.1 kg
		Rosca entrada / Port thread:	1/8 PS
		Nivel de ruido / Noise level:	50 db

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ø EXT. OD (MM.)	LONGITUD APROX. LENGTH APPROX. (MM.)
	15 60 15	15	16-17	115

Centrifuge tubes Conical bottom, graduated from 0 to 10 ml in 0.5 ml divisions Borosilicate glass 5.1

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ø EXT. OD (MM.)	LONGITUD APROX. LENGTH APPROX. (MM.)
	15 70 10	10 (1/10)	16-17	115
	15 70 15	15 (1/10)	16-17	115

Centrifuge tube, conic cylindrical

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	A.S.T.M. A.S.T.M.
	49 71 00	100	D – 96 – 63

Centrifuge tubes Cylindrical. Round bottom. Heavy duty.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ø EXT. OD (MM.)	LONGITUD LENGTH (MM.)
	15 90 15	15	16	100
	15 90 25	25	24	100
	15 90 50	50	34	100
	15 90 80	80	44	100

Centrifuge tubes Graduated, cylindrical. Round bottom. Heavy duty.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	DIMENSIONES DIMENSIONS (MM.)
	15 91 15	15	16 x 100
	15 91 25	25	24 x 100
	15 91 50	50	34 x 100
	15 91 80	80	44 x 100

Centrifuge tubes Cylindrical. Round bottom. Screw cap.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	DIMENSIONES DIMENSIONS (MM.)	ROSCA SCREW
	15 92 00	12	16 x 100	SVL – 13
	15 92 02	25	24 x 110	SVL – 18
	15 92 04	50	34 x 110	SVL – 25
	15 92 06	80	40 x 130	SVL – 30
	15 92 08	100	44 x 130	SVL – 30
	15 92 10	250	56 x 165	SVL – 42

Centrifuge tube, Oil Pear shape.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	A.S.T.M. A.S.T.M.
	49 72 00	100	D – 96 – 63

Drying tube Straight.

	REFERENCIA CAT. NUMBER	LONGITUD “L” LENGTH “L” (MM.)
	25 33 01	100
	25 33 02	150

Drying tube Bent.

	REFERENCIA CAT. NUMBER	LONGITUD “L” LENGTH “L” (MM.)
	25 34 01	100
	25 34 02	150

Drying tube, bent With outer joint.

	REFERENCIA CAT. NUMBER	ESMERILADO JOINT
	25 30 11	14 / 23
	25 30 21	19 / 26
	25 30 41	29 / 32

Manifold With glass stopcock. Distance between hose connectors 60 mm.

	REFERENCIA CAT. NUMBER	Nº SALIDAS CON LLAVE NUMBER OF OUTLETS
	25 69 13	3
	25 69 14	4
	25 69 15	5
	25 69 16	6

Manifold With PTFE needle stopcock, principal hose connector Ø 14-15 mm.
Secondary hose connector Ø 10-11 mm. Distance between hose connectors 60 mm.

	REFERENCIA CAT. NUMBER	Nº SALIDAS CON LLAVE NUMBER OF OUTLETS
	25 68 40	4
	25 68 50	5
	25 68 60	6

Digestion tube

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES	DIMENSIONES ø X L DIMENSIONS ø X L (MM.)
	14 10 40	P/ Tecator y otros	42 x 300
		For System Tecator and other

Engraved digestion tubes

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES	DIMENSIONES ø X L DIMENSIONS ø X L (MM.)
	14 10 01	100	26 x 300
	14 10 02	250	42 x 300

Digestion tubes Graduated.

	REFERENCIA CAT. NUMBER	DIMENSIONES ø X L DIMENSIONS ø X L (MM.)
	14 00 01	42 x 300
	14 00 02	48 x 300

Test tubes Rimless. Borosilicate glass. UNE 400319.

	REFERENCIA CAT. NUMBER	CAPACIDAD APROX. CAPACITY APPROX. (ML.)	ø EXT. OD (MM.)	LONGITUD LENGTH (MM.)	ESPESOR THICKNESS (MM.)
	15 01 04	4	10	100	1
	15 01 24	8	12	120	1
	15 01 64	20	16	160	1,2
	15 01 84	30	18	180	1,2
	15 02 04	40	20	200	1,2

Borosilicate test tubes With interchangeable outer, without stopper Refer to cat. No. 2510 and 2511 for glass or polyethylene stoppers.

	REFERENCIA CAT. NUMBER	CAPACIDAD APROX. CAPACITY APPROX. (ML.)	ø EXT. OD (MM.)	LONGITUD LENGTH (MM.)	ESMERILADO JOINT
	15 20 10	5	13	100	10 / 19
	15 21 12	15	17	125	14 / 23
	15 22 15	30	22	150	19 / 26
	15 23 17	60	28	175	24 / 29
	15 24 20	100	34	200	29 / 32

Borosilicate test tubes with screw cap

	REFERENCIA CAT. NUMBER	DESCRIPCIÓN DESCRIPTION	LONGITUD LENGTH (MM.)	ø EXTERIOR OD (MM.)
	15 51 30	Tubo ensayo, c/ tapón
		Test tube with screw cap	100	13
	15 51 60	Tubo ensayo, c/ tapón
		Test tube with screw cap	100	16
	15 51 61	Tubo ensayo, c/ tapón
		Test tube with screw cap	125	16
	15 51 62	Tubo ensayo, c/ tapón
		Test tube with screw cap	150	16
	15 52 00	Tubo ensayo, c/ tapón
		Test tube with screw cap	125	20
	15 52 01	Tubo ensayo, c/ tapón
		Test tube with screw cap	150	20
	15 50 30	Tubo ensayo, s/ tapón
		Test tube without screw cap	100	13
	15 50 60	Tubo ensayo, s/ tapón
		Test tube without screw cap	100	16
	15 50 61	Tubo ensayo, s/ tapón
		Test tube without screw cap	125	16
	15 50 62	Tubo ensayo, s/ tapón
		Test tube without screw cap	150	16
	15 50 00	Tubo ensayo, s/ tapón
		Test tube without screw cap	125	20
	15 50 01	Tubo ensayo, s/ tapón
		Test tube without screw cap	150	20
	15 54 03	Tapón a rosca, PP, 13 mm.
		Screw cap, PP, 13 mm.
	15 54 06	Tapón a rosca, PP, 16 mm.
		Screw cap, PP, 16 mm.
	15 54 09	Tapón a rosca, PP, 20 mm.
		Screw cap, PP, 20 mm.

Test tubes They can be sterilised. Screw cap with teflon liner (code 2512).

	REFERENCIA CAT. NUMBER	CAPACIDAD APROX. CAPACITY APPROX. (ML.)	ø EXT. OD (MM.)	LONGITUD C/ TAPÓN TOTAL TOTAL LENGTH WITH SCREW CAP (MM.)	Nº TAPÓN THREAD FINISH
	15 32 00	8	14	100	13
	15 32 01	10	14	140	13
	15 34 20	10	16	100	15
	15 34 23	20	16	160	15
	15 34 40	15	18	100	18
	15 34 45	25	18	180	18
	15 36 60	20	20	100	20
	15 36 67	40	20	200	20
	15 36 80	25	22	100	22
	15 36 89	55	22	200	22

Borosilicate glass test tube, flat bottom Borosilicate glass 5.1. Auctoclavable. Aluminium screw cap.

	REFERENCIA CAT. NUMBER	DESCRIPCIÓN DESCRIPTION	DIMENSIONES DIMENSIONS (MM.)	ROSCA SCREW
	15 56 10	Tubo ensayo f/ plano c/ tapón	16 x 110	16 – R
		Flat bottom Test tube with screw cap
	15 57 10	Tubo ensayo f/ plano s/ tapón	16 x 110	16 – R
		Flat bottom Test tube without screw cap
	15 57 00	Tapón de aluminio		16 – R
		Aluminium crew cap

Nessler cylinders For colorimeters.

	REFERENCIA CAT. NUMBER	CAPACIDAD (AFORADOS EN ML.) CAPACITY ENGRAVED IN (ML.)	ø EXT. OD (MM.)	LONGITUD LENGTH (MM.)
	15 10 01	50	24	180
	15 10 02	25 – 50	24	180
	15 10 03	100	28	280
	15 10 04	50 – 100	28	280

Nessler cylinders For colorimeters. With spout.

	REFERENCIA CAT. NUMBER	CAPACIDAD (AFORADOS EN ML.) CAPACITY ENGRAVED IN (ML.)	ø EXT. OD (MM.)	LONGITUD LENGTH (MM.)
	15 10 11	50	26	150
	15 10 12	25 – 50	26	150
	15 10 13	100	32	200
	15 10 14	50 – 100	32	200

Tubes, sample collection

With side stopcock and hose connector

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ESMERILADO JOINT
	15 13 00	25	19 / 26
	15 13 02	50	19 / 26
	15 13 04	100	19 / 26
	15 13 06	250	19 / 26
	15 13 08	500	29 / 32

Tubes, sample collection

Graduated with side stopcock and hose connector.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ESMERILADO JOINT
	15 14 00	25	19 / 26
	15 14 02	50	19 / 26
	15 14 04	100	19 / 26
	15 14 06	250	19 / 26
	15 14 08	500	29 / 32

Thiele tube, melting point

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	52 20 01	Para determinación del punto de fusión
		For melting point determination tests

Thiele tube, melting point

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	52 24 02	Con ramas laterales
		With two sidearms

Capillary tube For Thiele tube.

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	52 26 00	1,5 a 2 mm. Ø exterior / 1.5 – 2 mm. OD
		60 mm. longitud (250 unds) / 60 mm. length (250 pcs)

Tube For gas inlet.

	REFERENCIA CAT. NUMBER	ESMERILADO JOINT	LONGITUD DE TUBO LENGTH (MM.)	ø DE LA OLIVA ø HOSE
	25 25 11	14 / 23	250	10 – 11
	25 25 21	19 / 26	250	10 – 11
	25 25 41	29 / 32	250	10 – 11

Tube For gas inlet, with needle PTFE stopcock.

	REFERENCIA CAT. NUMBER	ESMERILADO JOINT	LONGITUD DE TUBO LENGTH (MM.)	ø DE LA OLIVA ø HOSE
	25 26 11	14 / 23	250	10 – 11
	25 26 21	19 / 26	250	10 – 11
	25 26 41	29 / 32	250	10 – 11

Tubes for determining freezing point

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	25 47 10	Norma ASTM D-97-96

Drying tube, U-shaped

	REFERENCIA CAT. NUMBER	LONGITUD DE TUBO LENGTH (MM.)	ø INTERIOR DEL TUBO ID (MM.)
	25 40 10	180	18
	25 40 20	250	18

Drying tube, U-shaped, with hose connector

	REFERENCIA CAT. NUMBER	LONGITUD L LENGTH L (MM.)	ø INTERIOR DEL TUBO ID (MM.)	ø EXT. OLIVAS HOSE ø (MM.)
	25 43 01	130	13	10 – 11
	25 43 02	180	18	10 – 11
	25 43 03	250	18	10 – 11

Drying tube, U-shaped, with hose conector and glass
stopper stopcock

	REFERENCIA CAT. NUMBER	LONGITUD L LENGTH L (MM.)	ESMERILADO JOINT	ø EXT. OLIVAS HOSE ø (MM.)
	25 42 10	180	14 / 23	10 – 11
	25 42 20	250	19 / 26	10 – 11

High quality transparent silicone tube
CE.

According to:
- GMP standards
- European Pharmacopoeia (2nd Edition) chemical test requirements.
- USP XXIII Class VI requirements (biological tests)
- FDA and BfR positive lists as well as food grade tests according to EC directives
- Density: 1.16 – Hardness Shore 62+/5
- Elongation before breaking > 300%
- Temperature range: -62 ºC up to +220 ºC
- Supplied in meters

	REFERENCIA CAT. NUMBER	DIÁMETRO INT. ID (MM.)	DIÁMETRO EXT. OD (MM.)	PARED THICKNESS (MM.)
	TUBS 0002	0,5	2,5	1,0
	TUBS 0004	1,0	3,0	1,0
	TUBS 0006	1,5	3,0	0,75
	TUBS 0008	2,0	4,0	1,0
	TUBS 0010	2,0	5,5	1,75
	TUBS 0012	2,0	6,0	2,0
	TUBS 0014	3,0	5,0	1,0
	TUBS 0016	3,0	5,5	1,25
	TUBS 0018	3,0	6,0	1,5
	TUBS 0020	3,0	7,0	2,0
	TUBS 0022	4,0	6,0	1,0
	TUBS 0024	4,0	7,0	1,5
	TUBS 0026	4,0	8,0	2,0
	TUBS 0028	4,0	10,0	3,0
	TUBS 0030	5,0	7,0	1,0
	TUBS 0032	5,0	8,0	1,5
	TUBS 0034	5,0	9,0	2,0
	TUBS 0036	5,0	10,0	2,5
	TUBS 0038	6,0	8,0	1,0
	TUBS 0040	6,0	9,0	1,5
	TUBS 0042	6,0	10,0	2,0
	TUBS 0044	6,0	12,0	3,0
	TUBS 0046	7,0	10,0	1,5
	TUBS 0048	7,0	11,0	2,0
	TUBS 0050	7,0	12,0	2,5
	TUBS 0052	7,0	13,0	3,0
	TUBS 0054	8,0	11,0	1,5
	TUBS 0056	8,0	12,0	2,0
	TUBS 0058	8,0	14,0	3,0
	TUBS 0060	8,0	16,0	4,0
	TUBS 0062	8,5	12,0	1,75
	TUBS 0064	9,0	13,0	2,0
	TUBS 0066	10,0	14,0	2,0
	TUBS 0068	10,0	16,0	3,0
	TUBS 0070	10,0	18,0	4,0
	TUBS 0072	10,0	23,0	6,5
	TUBS 0074	12,0	15,5	1,75
	TUBS 0076	12,0	17,0	2,5
	TUBS 0078	15,0	21,0	3,0
	TUBS 0080	18,0	24,0	3,0
	TUBS 0082	20,0	27,0	3,5

Glass tube cutter Metallic.

	REFERENCIA CAT. NUMBER	PARA TUBOS HASTA FOR TUBES UP TO (MM.)
	CORV 0030	30

Screwcaps for tubes and vials Black cap made of phenolic resin with washer.

	REFERENCIA CAT. NUMBER	ROSCA THREAD FINISH
	96 10 22	13 – 425
	96 10 23	15 – 425
	96 10 24	18 – 400
	96 10 26	22 – 400

Test tube clamps

	REFERENCIA CAT. NUMBER	CARACTERÍSTICAS FEATURES
	PITE 0000	Pinzas plástico de gran resistencia al calor
		Plastic forceps, very heat-resistant

Test tube clamps Made of steel, for tubes up to 25 mm. Ø .

	REFERENCIA CAT. NUMBER	LARGO LENGTH (MM.)
	PITE 0120	120
	PITE 0160	160

	REFERENCIA CAT. NUMBER	ESMERILADO JOINT
	25 07 50	14 / 23
	25 07 52	19 / 26
	25 07 54	29 / 32
	25 07 56	45 / 40

Glass stoppers

	REFERENCIA CAT. NUMBER	ESMERILADO JOINT
	25 10 10	7 / 16
	25 10 00	10 / 19
	25 10 12	12 / 21
	25 10 01	14 / 23
	25 10 02	19 / 26
	25 10 03	24 / 29
	25 10 04	29 / 32
	25 10 05	34 / 35
	25 10 07	45 / 40

Plastic stoppers

	REFERENCIA CAT. NUMBER	ESMERILADO JOINT
	25 11 07	7 / 16
	25 11 00	10 / 19
	25 11 12	12 / 21
	25 11 01	14 / 23
	25 11 02	19 / 26
	25 11 03	24 / 29
	25 11 04	29 / 32
	25 11 34	34 / 35
	25 11 05	45 / 40
	25 11 60	60 / 50

Silicone stoppers Transparent silicone, temperature range -60 a +220ºC.

	REFERENCIA CAT. NUMBER	DIÁMETRO SUP. UPPER DIAMETER (MM.)	DIÁMETRO INF. UPPER DIAMETER (MM.)	ALTURA HEIGHT (MM.)
	TASI 0006	6,5	3,5	15
	TASI 0008	8	4	20
	TASI 0010	9	5	20
	TASI 0013	12	8	20
	TASI 0015	14,5	10,5	20
	TASI 0016	16,5	12,5	20
	TASI 0018	18	14	20
	TASI 0021	22	17	25
	TASI 0024	24	18	30
	TASI 0027	27	21	30
	TASI 0029	29	23	30
	TASI 0031	32	26	30
	TASI 0034	35	29	30
	TASI 0038	38	31	35
	TASI 0041	41	34	35
	TASI 0045	44	36	40
	TASI 0049	49	41	40
	TASI 0054	55	47	40
	TASI 0060	59,5	50,5	45
	TASI 0065	65	56	45
	TASI 0070	70	60	50
	TASI 0075	75,5	64,5	55
	TASI 0083	83	71	60
	TASI 0092	92	79	65
	TASI 0100	100	87	65
	TASI 0107	107	94	65

Rubber stoppers Natural rubber, temperature –25 + 70 ºC.

	REFERENCIA CAT. NUMBER	DIÁMETRO SUP. UPPER DIAMETER (MM.)	DIÁMETRO INF. UPPER DIAMETER (MM.)	ALTURA HEIGHT (MM.)
	TAGK 1129	9	6	18
	TAGK 1131	12	9	18
	TAGK 1132	13	10	18
	TAGK 1133	15	11	18
	TAGK 1134	16	12	20
	TAGK 1135	18	13	22
	TAGK 1136	20	14	24
	TAGK 1137	23	16	26
	TAGK 1138	26	19	28
	TAGK 1139	30	21	29
	TAGK 1140	32	25	34
	TAGK 1142	37	28	37
	TAGK 1143	42	32	41
	TAGK 1144	45	34	45
	TAGK 1145	48	37	50
	TAGK 1146	54	41	53
	TAGK 1147	60	43	60
	TAGK 1148	65	52	60

Aluminium cap Treaded cap and washer.

	REFERENCIA CAT. NUMBER	ROSCA THREAD FINISH
	15 57 02	12 – R
	15 57 00	16 – R
	15 57 04	18 – R
	15 57 06	22 – R

Screwcaps for tubes and vials Black cap made of phenolic resin with washer.

	REFERENCIA CAT. NUMBER	ROSCA THREAD FINISH
	96 10 22	13 – 425
	96 10 23	15 – 425
	96 10 24	18 – 400
	96 10 26	22 – 400

Baquelite screw caps With PTFE liner.

	REFERENCIA CAT. NUMBER	Nº TAPÓN THREAD Nº
	25 12 13	13
	25 12 15	15
	25 12 18	18
	25 12 20	20
	25 12 22	22
	25 12 25	25
	25 12 30	30
	25 12 35	35
	25 12 42	42
	25 12 60	60

PP screw caps Sterilizable. Maximum temperature 120ºC. Different colours.

	REFERENCIA CAT. NUMBER	ROSCA THREAD FINISH	COLOR COLOUR
	16 20 50	GL- 45	Amarillo / Yellow
	16 20 60	GL- 45	Azul / Blue
	16 20 70	GL- 45	Verde / Green

PP pouring rings Sterilizable. Autoclavable

	REFERENCIA CAT. NUMBER	TAMAÑO ROSCA THREAD SIZE	ANILLO / COLOR RING / COLOUR
	16 40 50	GL- 45	Amarillo  / Yellow
	16 40 60	GL- 45	Azul / Blue
	16 40 70	GL- 45	Verde / Green

Threads, polypropylene Sterilizable, maximum temperature 121 ºC.

	REFERENCIA CAT. NUMBER	ROSCA THREAD FINISH	COLOR COLOUR
	TARO 0014	GL-14	Verde / Green
	TARO 0018	GL-18	Amarillo / Yellow
	TARO 0025	GL-25	Rojo / Red
	TARO 0032	GL-32	Gris / Gray
	TARO 0045	GL-45	Rojo-Burdeos / Red-Burgundy

Melanine resin screw cap with PTFE liner These screw caps will withstand sterilization.

	REFERENCIA CAT. NUMBER	ROSCA THREAD FINISH	COLOR COLOUR
	16 30 10	GL-45	Roja / Red
	16 30 09	GL-32	Roja / Red
	16 30 08	GL-25	Roja / Red
	16 30 07	GL-18	Roja / Red
	16 30 06	GL-14	Roja / Red

Tamper-evident screw caps For laboratory bottles with DIN thread ISO 4796 with lip seal. Autoclavable up to + 140 ºC steam. Polypropylene.

	REFERENCIA CAT. NUMBER	ROSCA GL DIN THREAD GL	COLOR COLOUR	DIÁMETRO DIAMETER (MM.)	ALTURA HEIGHT (MM.)
	TAPR 0045	45	Azul / Blue	54	26

Screwcaps with hole Sterilizable, maximum temperature +200 ºC, PBT.

	REFERENCIA CAT. NUMBER	ROSCA THREAD FINISH	COLOR COLOUR
	16 20 32	GL – 14	Roja / Red
	16 20 34	GL – 18	Roja / Red
	16 20 36	GL – 25	Roja / Red
	16 20 38	GL – 32	Roja / Red
	16 20 40	GL – 45	Roja / Red

Silicone washers Coated in vulcanized PTFE for GL threads.

	REFERENCIA CAT. NUMBER	DIMENSIONES DIMENSIONS (MM.)	PARA ROSCA FOR THREAD
	16 21 02	12 x 6	GL – 14
	16 21 04	16 x 6	GL – 18
	16 21 06	16 x 8	GL – 18
	16 21 08	16 x 10	GL – 18
	16 21 10	22 x 8	GL – 25
	16 21 12	22 x 10	GL – 25
	16 21 14	22 x 12	GL – 25
	16 21 16	29 x 10	GL – 32
	16 21 18	29 x 12	GL – 32
	16 21 20	29 x 14	GL – 32
	16 21 22	29 x 16	GL – 32
	16 21 24	29 x 18	GL – 32
	16 21 26	42 x 26	GL – 45
	16 21 30	42 x 32	GL – 45

Screwcaps with hole with hose and washer

	REFERENCIA CAT. NUMBER	ROSCA THREAD FINISH	OLIVA HOSE
	16 20 92	GL – 14	Recta / Straight
	16 20 94	GL – 14	Ángulo / Bent
	16 20 96	GL – 18	Recta / Straight
	16 20 98	GL – 18	Ángulo / Bent

Bottle pourer Permits direct pouring of all liquids from reagent bottles in a safe and consistent manner. Totally inert, with PTFE encapsulated viton neck seal.

	REFERENCIA CAT. NUMBER	ROSCA THREAD FINISH
	DISB 0045	GL- 45
	DISB 0038	GL- 38
	DISB 0032	GL- 32
	DISB 0030	GL- 30

Threaded joints SVS Flexible union of two glass threads with built-in silicone washer (VMQ) – PTFE, stable up to 200 ºC.

	REFERENCIA CAT. NUMBER	DOBLE ROSCA DOUBLE SCREW
	UNRO 0014	2 x GL 14
	UNRO 0018	2 x GL 18
	UNRO 0025	2 x GL 25
	UNRO 0032	2 x GL 32

Screwcaps closed with seal for "RODAVISS"

	REFERENCIA CAT. NUMBER	ROSCA THREAD
	TARO 1014	NS 14
	TARO 1019	NS 19
	TARO 1024	NS 24
	TARO 1029	NS 29
	TARO 1034	NS 34
	TARO 1045	NS 45

Screwcaps for "RODAVISS" with aperture and without sealing ring.

	REFERENCIA CAT. NUMBER	ROSCA THREAD
	TAOR 0014	NS 14
	TAOR 0019	NS 19
	TAOR 0024	NS 24
	TAOR 0029	NS 29
	TAOR 0034	NS 34
	TAOR 0045	NS 45
	Junta de Nitrilo / Sealing Nitrile Rings
	REFERENCIA CAT. NUMBER	PARA ROSCA FOR THREAD
	JUNR 0014	NS 14
	JUNR 0019	NS 19
	JUNR 0024	NS 24
	JUNR 0034	NS 34
	JUNR 0045	NS 45

Sealing rings for polished spherical joints (silicone + PTFE)

	REFERENCIA CAT. NUMBER	PARA RÓTULA FOR SPHERICAL JOINT
	JUNR 0113	NS 13
	JUNR 0119	NS 19
	JUNR 0129	NS 29
	JUNR 0135	NS 35
	JUNR 0141	NS 41
	JUNR 0164	NS 64

Reaction Vessels, cylindrical, flat bottom Cylindrical shape, without graduation. Other sizes on request.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ø INT. BOCA ID TOP (MM.)	ø EXT. BOCA OD TOP (MM.)	ALTURA HEIGHT (MM.)
	80 20 02	50	60	65	80
	80 20 04	100	60	65	115
	80 20 06	250	60	65	170
	80 20 08	500	60	65	255
	80 20 10	1.000	60	100	155
	80 20 12	250	100	105	110
	80 20 14	500	100	105	155
	80 20 16	1.000	100	105	220
	80 20 18	2.000	100	105	350
	80 20 20	3.000	100	160	285
	80 20 22	4.000	100	160	340
	80 20 24	2.000	150	160	225
	80 20 26	3.000	150	160	280
	80 20 28	4.000	150	160	335
	80 20 30	5.000	150	160	390
	80 20 32	6.000	150	180	445
	80 20 34	10.000	150	250	410

Reaction vessels, flat bottom, cylindrical, with thermostatic jacket Available with connector GL-14, GL-18, KF 15 o KF 25. Other sizes on request.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ø INT. BOCA ID TOP (MM.)	ø EXT. BOCA OD TOP (MM.)	ALTURA HEIGHT (MM.)	CONECTOR CONNECTOR
	80 23 30	100	60	90 / 65	110	GL – 14
	80 23 32	250	60	90 / 65	135	GL – 14
	80 23 34	500	60	90 / 65	190	GL – 14
	80 23 36	1.000	60	105 / 80	275	GL – 14
	80 23 46	250	100	130 / 105	110	GL – 18
	80 23 48	500	100	130 / 105	180	GL – 18
	80 23 50	1.000	100	130 / 105	245	GL – 18
	80 23 52	2.000	100	130 / 105	375	GL – 18
	80 23 54	3.000	100	190 / 160	325	GL – 18
	80 23 56	4.000	100	190 / 160	380	GL – 18
	80 23 70	2.000	150	190 / 160	265	GL – 18
	80 23 72	3.000	150	190 / 160	320	GL – 18
	80 23 74	4.000	150	190 / 160	375	GL – 18
	80 23 76	5.000	150	190 / 160	430	GL – 18
	80 23 78	6.000	150	190 / 160	485	GL – 18
	80 23 90	10.000	150	315 / 250	490	KF – 15
	80 23 92	20.000	150	315 / 250	710	KF – 25
	80 23 94	6.000	200	250 / 215	425	KF – 15
	80 23 96	10.000	200	250 / 215	555	KF – 15
	80 23 98	20.000	200	400 / 315	590	KF – 25

Reaction Vessels, cylindrical, round bottom Cylindrical shape, without graduation. Other sizes on request.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ø INT. BOCA ID TOP (MM.)	ø EXT. BOCA OD TOP (MM.)	ALTURA HEIGHT (MM.)
	80 20 50	50	60	65	95
	80 20 52	100	60	65	135
	80 20 54	250	60	65	190
	80 20 56	500	60	65	275
	80 20 58	1.000	60	100	175
	80 20 60	250	100	105	110
	80 20 62	500	100	105	170
	80 20 64	1.000	100	105	235
	80 20 66	2.000	100	105	375
	80 20 68	3.000	100	160	300
	80 20 70	4.000	100	160	355
	80 20 72	2.000	150	160	245
	80 20 74	3.000	150	160	300
	80 20 76	4.000	150	160	355
	80 20 78	5.000	150	160	410
	80 20 80	6.000	150	180	465
	80 20 82	10.000	150	250	430
	80 20 84	6.000	200	215	320
	80 20 86	10.000	200	215	460

Reaction Vessels, cylindrical, round bottom, with draining valve Cylindrical shape, without graduation. Other sizes on request.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ø INT. BOCA ID TOP (MM.)	ø EXT. BOCA OD TOP (MM.)	ALTURA HEIGHT (MM.)	LLAVE VALVE
	80 21 00	50	60	65	180	10
	80 21 02	100	60	65	220	10
	80 21 04	250	60	65	275	10
	80 21 06	500	60	65	360	10
	80 21 08	1.000	60	105	260	10
	80 21 10	250	100	105	200	10
	80 21 12	500	100	105	255	10
	80 21 14	1.000	100	105	320	10
	80 21 16	2.000	100	105	460	10
	80 21 18	3.000	100	160	385	10
	80 21 20	4.000	100	160	440	10
	80 21 22	2.000	150	160	330	10
	80 21 24	3.000	150	160	385	10
	80 21 26	4.000	150	160	440	10
	80 21 28	5.000	150	160	495	10
	80 21 30	6.000	150	160	550	10
	80 21 32	10.000	150	250	560	20
	80 21 34	20.000	150	250	815	20
	80 21 36	6.000	200	215	405	10
	80 21 38	10.000	200	215	600	20

Reaction vessels, cylindrical, round bottom, with stopcock and thermostatic jacket Available with connector GL-14, GL-18, KF-15 or KF-25. Other sizes on request.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ø INT. BOCA ID TOP (MM.)	ø EXT. BOCA OD TOP (MM.)	ALTURA HEIGHT (MM.)	CONECTOR CONNECTOR	LLAVE VALVE
	80 24 00	100	60	90 / 65	215	GL – 14	10
	80 24 02	250	60	90 / 65	270	GL – 14	10
	80 24 04	500	60	90 / 65	355	GL – 14	10
	80 24 06	1.000	60	105 / 80	350	GL – 14	10
	80 24 16	250	100	130 / 105	230	GL – 18	10
	80 24 18	500	100	130 / 105	275	GL – 18	10
	80 24 20	1.000	100	130 / 105	340	GL – 18	10
	80 24 22	2.000	100	130 / 105	470	GL – 18	10
	80 24 24	3.000	100	190 / 160	420	GL – 18	10
	80 24 26	4.000	100	190 / 160	475	GL – 18	10
	80 24 40	2.000	150	190 / 160	370	GL – 18	10
	80 24 42	3.000	150	190 / 160	415	GL – 18	10
	80 24 44	4.000	150	190 / 160	470	GL – 18	10
	80 24 46	5.000	150	190 / 160	525	GL – 18	10
	80 24 48	6.000	150	190 / 160	580	GL – 18	10
	80 24 50	10.000	150	315 / 250	620	GL – 18	15
	80 24 62	10.000	150	315 / 250	620	KF – 15	15
	80 24 64	20.000	150	315 / 250	875	KF – 25	25
	80 24 66	6.000	200	250 / 215	520	KF – 15	10
	80 24 68	10.000	200	250 / 215	680	KF – 15	15
	80 24 70	20.000	200	400 / 250	760	KF – 25	25

Reaction Vessels, Spherical Other sizes on request.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ø INT. BOCA ID TOP (MM.)	ø EXT. BOCA OD TOP (MM.)	ALTURA HEIGHT (MM.)
	80 21 50	250	60	85	120
	80 21 52	500	60	105	145
	80 21 54	1.000	60	131	175
	80 21 56	1.000	100	131	185
	80 21 58	2.000	100	165	210
	80 21 60	4.000	100	206	260
	80 21 62	6.000	100	236	285
	80 21 64	10.000	100	280	330
	80 21 66	20.000	100	350	400
	80 21 68	6.000	150	236	285
	80 21 70	10.000	150	280	335
	80 21 72	20.000	150	350	410
	80 21 74	6.000	200	236	325
	80 21 76	10.000	200	280	305
	80 21 78	20.000	200	350	385

Reaction Vessels, Spherical, withdrawal valve Other sizes on request.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ø INT. BOCA ID TOP (MM.)	ø EXT. BOCA OD TOP (MM.)	ALTURA HEIGHT (MM.)	LLAVE VALVE
	80 22 00	250	60	85	190	10
	80 22 02	500	60	105	215	10
	80 22 04	1.000	60	131	245	10
	80 22 06	2.000	100	165	295	10
	80 22 08	4.000	100	206	345	10
	80 22 10	6.000	100	236	370	10
	80 22 12	10.000	100	280	460	20
	80 22 14	20.000	100	350	550	20
	80 22 16	6.000	150	236	370	10
	80 22 18	10.000	150	280	465	20
	80 22 20	20.000	150	350	560	20
	80 22 22	6.000	200	236	325	10
	80 22 24	10.000	200	280	435	20
	80 22 26	20.000	200	350	535	20

Reaction vessels, spherical, with thermostatic jacket Available with connector GL-14, GL-18, KF-15 or KF-25. Other sizes on request.

	REFERENCIA CAT. NUMBER	CAPACIDAD CAPACITY (ML.)	ø INT. BOCA ID TOP (MM.)	ø EXT. APPROX. OD APPROX. (MM.)	ALTURA HEIGHT (MM.)	CONECTOR CONNECTOR
	80 25 00	250	60	105 / 85	145	GL – 14
	80 25 02	500	60	131 / 105	175	GL – 14
	80 25 04	1.000	60	165 / 131	210	GL – 14
	80 25 12	2.000	100	206 / 165	260	GL – 18
	80 25 14	4.000	100	236 / 206	285	GL – 18
	80 25 16	6.000	100	280 / 236	330	GL – 18
	80 25 24	6.000	150	280 / 236	335	GL – 18
	80 25 26	10.000	150	350 / 275	410	KF – 15
	80 25 28	20.000	150	490 / 345	565	KF – 25
	80 25 30	6.000	200	280 / 236	320	KF – 15
	80 25 32	10.000	200	350 / 275	400	KF – 15
	80 25 34	20.000	200	490 / 345	550	KF – 25